-40%
5A Brushed ESC Two-way 2s 3s Lipo 130 180 260 motor RC boat car Speed Controller
$ 4.5
- Description
- Size Guide
Description
Description:Quantity:1pc
5A Brushed ESC Two-way 2s 3s Lipo 130 180 260 motor RC boat car Speed Controller
Electric current :5A
Voltage :2s,3s
Size:28mmx21mm
Features : two-way ,
(The motor can rotate forward and backward,)
No problem with toy motors 130,180 260 and 370.
Increase current burst capacity by 30%.
Parameters:
6v-14v single-way 5A, single-way peak 7A (suitable for 2/3S lithium power, not 4S, positive and negative do not reverse)
(The toy current of 130,260 motors is less than 5A, which can be used for this adjustment.)
Position fixed PWM 1500us (+50-50) in remote control, automatic adaptation with minimum run 700-1100 and maximum 1900-2300
There is a power-on prompt (you will hear the "beep" of the motor, prompt the power-on)
Start with median point (throttle channel 1500, can hear the motor "Doodle", electrically adjustable start)
With out-of-control protection (loss of signal (in the accident, the signal line is broken), in order to be safe and motor protection, it is necessary to return the throttle to the middle and re-unlock.
Over-heat protection (130 degrees) and over-current protection (but if connected to large current motors far beyond 5A, such as violent 550 motors, self-conceited in seconds)
Other:
Bec outputs 5V max. 1.5A to meet your demand for power supply to the steering gear
Plate size: 28x21mm
There are two modes for this electric regulation, switch selection
Brake mode (F/B/R) default
That is, the forward and reverse belt braking mode, which provides reversing function, is usually used in daily training, suitable for high-speed vehicles.
In this mode, when the throttle rocker swiftly hits the reverse area from the forward direction, the motor only brakes (the braking force increases with the degree of hitting the reverse lever).
If it hits the mid-point forward (without reaching the reverse pole area), then the electric adjustment does not drive the motor, but the car can rely on inertia taxiing.
You must stay at the median for about 0.3 seconds before you can reverse. (In fact, if you stay a little in the middle, you can reverse the car, so it's better to operate.)
When reversing, the output of the electric adjustment is smaller, which is 75% of the forward.
Positive and Reverse Mode (F/R)
Forward pole, backward pole, middle brake. Suitable for high-grade climbing car and slow toy car.
The output of this mode is as large as that of forward and backward power regulation.
(Sliding button, effective before power-on)
Payment Policy :
We only accept payments via PayPal.
Shipping Time & Method:
Item will be shipped within 3 days after payment is confirmed. Goods will be sent via airmail .
Delivery takes about 18-25 day (without holidays). All products have been checked and packaged in good condition before dispatch.
Please make sure your address in PayPal is matched with your shipping address before pay. If you would like to change the address, please contact us IMMEDIATELY after your payment.
Return policy :
After receiving item. 30 days can return Items must be the original packaging. No use. No damage. Buyers bear the freight cost.