US Stock RECI W4 / S4 100W-130W or W6 / S6 130W-160W CO2 Sealed Laser Tube

Description

US Stock RECI W4 / S4 100W-130W or W6 / S6 130W-160W CO2 Sealed Laser Tube
High power rate, fast - speed cutting and small size
Origin: Asia and Pacific Area China
Quality standard: International
H.S.Classification: Machinery & Electronics Electr.Element 8541 Semiconductor devices; light - emitting diodes etc.
Model
Rated Power
Max Power
length
Φ
Catalyze
Life span
Warranty
W4
100W
130W
1400mm
80mm
Yes
10,000h
10 months
Model
Rated Power
Max Power
length
Φ
Catalyze
Life span
Warranty
W6
130W
160W
1650mm
80mm
Yes
10,000h
10 months
We will send a new one freely if the tube is broken during transit.
Once received the laser tube, please check again at the first time. We need the damaged record from the courier as the proof before we send the new one free.
W4/ S4:
Output Power:
Its output power can reach 115w. The production process of the tube is standardized, so the output power and output model are guaranteed. Its cutting effect and cutting speed is the same as 120w laser tube of other brands. (The other laser tubes are handmade, so the quality is different from one tube to another)
Long life span:
We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months)
W6 / S6
Output Power: Its output power can reach 155w. The production process of the tube is standardized, so the output power and output model are guaranteed. (For other laser tube manufacturers: can’t provide this product)
Long life span: We have catalyst plating in the inner wall of the laser tube. Designing lifespan is 10,000 hours and the warranty is 10 months. (No catalyst technique is used by other laser tubes manufacturers. Their lifespan is 3000 hours and the warranty is only 3 months)
High performance cost ratio: High output power, high efficiency, and high performance cost ratio.
High photoelectric conversion rate: The output power will decrease for less than 2w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 100w tubes of other brands. (Other brands: The output power decrease rapidly when the cooling water’s temperature is 42℃)
Appearance:
The tube is sealed by metal material. It is industrial product. (No metal material is used by other manufacturers. Their tubes are handmade and need extra water cooling for front and rare mirrors).
Tube frame:
This is exclusive design for Reci laser tube. You can use it to install our laser tubes into the machine to spare the freight cost. This frame is shockproof and makes sure the tube will not move during the transport. (No frame is provided by other manufacturers.)
Length:
W4 / S4: The length is only 1.4m. It reduces the volume of the machine and minimizes freight cost.
(The length of other 80w tubes is 2m. 400mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.)
W6 / S6: The length is only 1.65m. It reduces the volume of the machine and minimizes freight cost.(The length of other 150w tubes is 1.8m. 150mm must be projecting in the machine. That costs more for machine sheet metal, package and transport.)
W4 / S4:
Reci W4 CO2 laser tube is featured as high power rate, good model, fast - speed cutting and small size, which is used for the cutting of leather, cloth and processing of lampshade and handicraft.
• Cutting function
• Engraving function: Very good, when the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
Laser is used in more and more applications!
Hollow - out Engraving, you need it!
Garment cutting & tailoring, you need it!
Leather cutting, you need it!Acrylic board cutting, you need it!
DIE board cutting, you need it!
Rubber sheet cutting, you need it!
Bamboo engraving, you need it!
The glass laser tube made in China (i.e. the laser tube) is same with the one imported in processing and applications, but there are big differences in appearance, structure, life span, performance and same to prices. However, for the same power, the imported laser is tens of times higher in comparison with the former. (There is as big differences with same life spans, the imported CO2 laser can be recharged for use while the laser tube made in China is generally disposable to be used one time only). So the Chinese laser is recognized and accepted by domestic & foreign customers since it is economical and practical with lower price.
As long as the length parameter is applicable, you can use our tube to substitute!
W6 / S6:
Reci W6 CO2 laser tube is featured as high power rate, good model, and fast - speed cutting and small size, which is used for the cutting of DIE cutting, thick acrylic board cutting.
• High power cutting
High photoelectric conversion rate:
No compression type water chiller should be equipped. The output power will decrease for less than 1w when the cooling water’s temperature is 42℃. Its heat productivity is lower than 60w tubes of other brands. (Other brands: The output power decreases rapidly when the cooling water’s temperature is 42℃)
Warranty:
10 months, international warranty service, Reci charges the freight for exchanging the defect tube. (For others laser tube brands: warranty for 3 months, no international warranty service)
High performance cost ratio:
When you buy Reci Laser tube, you can spare money for sheet metal, transport. Besides, you get 10 months warranty and the top level after sale service.
Installation Requirement
W4 / S4
1.
Make sure to follow the operation instructions of model W4 as shown in the illustration. The dedicated power DY13 should be equipped. The positive pole is in high voltage (The ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
2. Operation conditions
• Water cooling: Using purified water; 2 to 5 liter / minute; water temperature: 10℃ - 40℃.
• The operating environment: temperature 2 - 40℃, humidity 10-60%.
• Test current is 29mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. The ammeter indicating current must be connected to the negative electrode of the laser tube.
• When it is working under over - high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly.
• To protect dust from going into the insulation sheath, please wrap it with plastic film.
3. Working Performance
4. Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideway with air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention:
It is forbidden to clean the mirror with acetone.
The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped.
Put the acryl 300mm far away from output mirror, when testing the laser spot.
5. Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
6. Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust - proof plastic bag. The storage environment is 2 - 40℃, and the requested humidity is 10 - 60%. Pack the laser as in the original way.
Important notes:
it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider.
7. Tubes operated in wrong way will not be guaranteed by Manufacturer.
W6 / S6
1. Make sure to follow the operation instructions of model W6 as shown in the illustration. The dedicated power DY20 should be equipped. The positive pole is in high voltage (The ignition voltage is 28kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
2. Operation conditions
• Water cooling: Using purified water; 3 to 5 liter / minute; water temperature: 10℃ - 40℃.
• The operating environment: temperature 2 - 40℃, humidity 10-60%.
• The working current: test current is 29mA. Maximum working current is 32mA. The running current must be kept below 30mA. The life span can reach 10,000 hours if the current is kept below 28mA. The ammeter indicating current must be connected to the negative electrode of the laser tube.
• When it is working under over - high current for long term, the negative pole will appear light yellow, and the life span will be reduced rapidly.
• To protect dust from going into the insulation sheath, please wrap it with plastic film.
3. Working Performance
• Cutting function.
4. Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideway with air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention:
It is forbidden to clean the mirror with acetone.
The screw in the front and back ends of the laser tube is not allowed to be moved, otherwise the out power will be declined and even the tube may be scrapped.
Put the acryl 300mm far away from output mirror, when testing the laser spot.
5. Safety
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
6. Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust - proof plastic bag. The storage environment is 2 - 40℃, and the requested humidity is 10 - 60%. Pack the laser as in the original way.
Important notes:
it is requested to cement the sponge together with laser tube to prevent the tube vertically sliding during transportation. The sponge in the side of output mirror must be 70mm beyond it, and the sponge in the side of reflecting mirror must be 50mm wider.
7. Tubes operated in wrong way will not be guaranteed by Manufacturer.
How to check the laser?
The laser power will reduce gradually while using. When the maximum power can’t carve deep enough, please change the laser tube.
We need to exclude other reason of the problem.
Firstly, make sure following things: Cooling - water flows well and bot hot or dirty. When water temperature is higher, laser’s power will drop fast, or even explode the laser. At this time, change it or add more cooling water.
Secondly, make sure the mirrors, lens and light rought are all good.
Thirdly, make sure the electrical power and fanners is working well. When the temperature of electrical power is higher, it will afect the laser.
In fact, laser’s power will reduce slowly. When the laser is all right, light beam in the tube is pink - purple, when it’s near to be finished, the light change to with.
Shipment:
1.
Your
order will be shipped by
UPS /USPS/FedEx
.
2.If the weight of your order
exceeds
150 lbs
.,
we will ship your order to you on a pallet,
using a
trucking company
.
The weight of this product exceeds 150 lbs and cannot be shipped through FedEx or UPS. It requires a special delivery truck,
so we will need your correct phone number and address in order to schedule the service.
Addresses
cannot be changed
once the product has been shipped.
The delivery service
does not include a lift-gate
,
residential service, installation, or delivery inside your house
.
For residential address
deliveries and lift-gate service, please
contact us for details.
Local Pick-up:
We have local
ware
hours in
C
A and GA
, USA.
Support
Local Pick-up for Custom
er in C
alfiornia or Georgia
, USA!
In local store, if you pick-up by yourself and visit our store, you will get
50%
discount for first material supplies order or free samp
l
es
.
Process of Local Pickup:
1
.
After payment, you will get the number and the adress for Local Pickup.
2
.
We will give you the package acording your numbers, so please don't tell anybody your numbers.
3
.
Our working time is 10:00am- 17:00 pm ( From Monday-Friday).
4
.
You'd better to make an appointment before you go to us.
Financing
We have cooperated with first-class financing services to provide you with convenient, quick, and flexible financing options to fit any size business or budget, and ensure that you can obtain the required funds to develop business development.